Application:

QY-NO.3004 Series is a sanitary aseptic sampling valve , which can be carried out before and after each sampling fungi.

Valve Opening: Sampling

You can manually turn the handle opens the valve (adjustable valves) or by driving bar ( open/close valve) valve stem and diaphragm retraction at this time, so that the liquid flows.

Valve off: Sterilization

Built-in step for spring opposite the valve closed, the cavity between the hose components vacated for sterilization. If you use steam sterilization, we recommend installation in the valve outlet of a small pressure relief valve(of the selected products)

Standard Design:

Aseptic sampling valve consists of three parts, valve,valve head and diaphragm. Rubber septum membrane placed on the valve head so that it can be flexible rod. Between the valve body and the head model can be interchangeable.

Aseptic Sampling Valve in Two Sizes:

M4 valve for low viscosity materials such as water,beer and liquid milk.

W9 valve for high viscosity materials such as fruit, yogurt,syrup and ice cream.

W9 valve can also be coupled with micro-sampling ports,sampling by syringe.

Temperature:

Maximum sterilization temperature, dry steam ( 2~3 bar): 121 ~134℃

Valve Body Types Include:

Welding for the installation of the container port, port welding for pipeline installation, interfaces with a clamp or threaded interface.

Valve Body:

T-type: for vessel installation ( welding ending)

P-type: for vessel installation(welding ending)

C-type: clamp interface

S-type: Plug0in interface(thread)

Material:

Body: Stainless steel,AISI 316L

Valve head: Stainless steel,AISI 304

Diaphragm: Silicone rubber ( Standard Valves)

Ethylene propylene diene monomer (EPDM)( with micro-sampling port valve)

Technical Parameters:

Work pressure at the valve seat ( valve closed) : 1000kpa(10 bar)

Work Pressure at the valve cover (valve opened): Rubber 500kpa(5 bar)

Stainless Steel: 1000kpa(10 Bar)

Dimension:(QY-NO.3004 Syringe Pumping Sampling Valve)